Baker Hughes Druck DPI 610 IS, Instruction Manual

Page: 23 / 76

Copyright 2007 Baker Hughes Company.
English–DPI 610/615 IS Instruction Manual | 13
Pressure Transmitter (P-I) Task
4. Taking Measurements
4.1 Pressure Transmitter (P-I) Task
Select the P-I task from the task menu and connect the Unit Under Test (UUT) to the calibrator
as shown below:
• If required, select the output units as described in Section 3.3.
• If applicable, turn on Cal Mode and set-up test parameters as detailed in Section 3.4.
4.2 Voltage Output Pressure Transmitter (P-V) Task
Select the P-V task from the task menu and connect the Unit Under Test (UUT) to the instrument
as shown below:
• If required, select the output units as described in Section 3.3.
A External pressure source (indicator instruments only) B Pressure regulator
C Pressure to current device D Barrier
E External supply F Safe area
A External pressure source (indicator instruments only) B Pressure regulator
C Pressure to voltage device D Barrier
E External supply F Safe area
PRESSURE INT
CURRENT
TASK : P-I
SNAPSHOT MODE
PRESSURE INT
VOLTAGE
CURRENT
PRESSURE
UNITS
TASK : BASIC