Baker Hughes Druck DPI 610 IS, Instruction Manual

Page: 12 / 76

Copyright 2007 Baker Hughes Company.
2 | DPI 610/615 IS Instruction Manual–English
Chapter 1. Introduction
1.3 Using This Guide
The following key symbols are used in the procedure diagrams:
1.4 Maximum Instrument Ratings
The following table shows the maximum measurement input ratings of the instrument which
should not be exceeded.
Table 1 - 1: Key Symbols
Key Description
Shaded cursor keys indicate that a combination of these four keys, Up,
Down, Left and Right should be used to (e.g.) enter an alpha numeric value
or to select a function.
Indicates the ENTER key. Used to confirm an operation or a selection.
Shading indicates key operation.
Exit key, used to clear current menu selection and return to next menu level
above current level. Used as an escape key from current operation. Shading
indicates key operation.
Hardkey (total 7). Legend beside key symbol indicates function. Shading
indicates key operation.
Table 1 - 2: Maximum Instrument Rating
Parameter Maximum Rating
a
a. The display flashes if the input pressure, voltage
or current over-range.
Pressure 120% of full-scale
Voltage 30 V dc
Current 55 mA dc
EXIT
RECALL