Baker Hughes Druck DPI 610 IS, Instruction Manual

Page: 13 / 76

Copyright 2007 Baker Hughes Company.
English–DPI 610/615 IS Instruction Manual | 3
Operator Controls
1.5 Operator Controls
These divide into two groups, the operator/display controls (Figure 1 - 1 on page 3) and the
pressure/vacuum generation components (Figure 1 - 2 on page 5). The operator controls and a
typical display, common to all instrument versions, is shown below.
Figure 1 - 1: DPI 610/615 IS Key-pad
1.6 Display
The display and key-pad of the instrument divides into four distinct sections. The two main
sections of the display are used to show an input and an output. The remaining two sections show
the status display area and define the soft key functions. A typical display is shown below:
1 Display 2 Electrical Measurement Input Sockets
3 Cursor Keys 4 Enter Key
5 Function (Soft) Keys 6 Hard Keys
7 On/Off Key
1 Status Display 2 Input Display
3 Output Display 4 Soft Boxes
PRESSURE INT
VOLTAGE
CURRENT
PRESSURE
UNITS
TASK : BASIC
PRESSURE INT
VOLTAGE
CURRENT PRESSURE
UNITS
TASK : BASIC