Baker Hughes Druck DPI 610 IS, Instruction Manual

Page: 31 / 76

Copyright 2007 Baker Hughes Company.
English–DPI 610/615 IS Instruction Manual | 21
General
5. Advanced Task
5.1 General
Advanced task allows the user to configure the instrument to monitor one of a number of different
input measurements and outputs (sources). Additionally, five process functions, Tare , Max/Min ,
Filter , Flow and %Span can be applied to the input functions.
5.2 Select Input
To select an input channel, select ADVANCED task from the task menu. The display shows the
list of the input selections and, if available, the PROCESS soft box
(F1)
and the
UNITS
soft box
(F2) .
The following procedure shows the method of input channel selection and the method of
changing units:
Note: Left/right arrow keys function as page up/down keys.
Refer to Section 5.4 for details of process functions.
5.3 Ambient Temperature Measurement
To set-up the instrument to read ambient temperature, proceed as follows:
Note: Ensure that the temperature reading has stabilized.
5.4 Process Functions
If required, the following process functions are available on the input display but only in
ADVANCED task. If the instrument is in any other mode i.e. BASIC or any other task mode, the
input and output displays must first be configured in ADVANCED task.
SELECT INPUT
SELECT INPUT
SELECT UNITS
SELECT UNITS
OF PRESSURE
PROCESS UNITS
SELECT INPUT
PRESSURE INT
PRESSURE EXT
VOLTAGE
CURRENT
SWITCH TEST
AMBIENT TEMP
NO INPUT
PROCESS UNITS
SELECT INPUT
SELECT UNITS
SELECT AIR
TEMPERATURE
UNITS
SELECT INPUT
SELECT INPUT
PROCESS
AMBIENT TEMP
NO INPUT
UNITS