Copyright 2007 Baker Hughes Company.
English–DPI 610/615 IS Instruction Manual | 35
General
7. Using Set-up
7.1 General
SETUP
mode is available in all modes except
BASIC
and permits the changing of the following
instrument parameters.
•
Store Mode - None, Snapshot, Data Log.
•
Contrast.
•
Settings - Units, Language, RS232 parameters, Powerdown and Calibration Routines (Refer
to Section
8 for calibration details).
•
Date and Time (Real Time Clock).
7.2 Store Mode
Select
STORE MODE
from the Set-up menu and select required mode as follows:
7.3 Contrast
Select
CONTRAST
from the Set-up menu and proceed as follows:
7.4 Settings - Select Setup Option
To select one of the
SETTINGS
options from the set-up menu, proceed as follows:
SELECT OPTION
SETUP
STORE MODE
CONTRAST
SETTINGS
DATE & TIME
DRY CELL LEVEL
SELECT OPTION
STORE MODE
NONE
SNAPSHOT
DATALOG
SELECT OPTION
SETUP
STORE MODE
CONTRAST
SETTINGS
DATE & TIME
SELECT LEVEL
CONTRAST
ADJUST CONTRAST
DRY CELL LEVEL
SELECT OPTION
SELECT OPTION
SETUP
SETTINGS
DRY CELL LEVEL
STORE MODE
CONTRAST
SETTINGS
DATE & TIME
UNITS
LANGUAGE
RS232
POWERDOWN
CALIBRATION
Summary of Contents for Druck DPI 610 IS
