Basic of
D
isassembly
Basic of Disassembly
2 - 36
LED lamp / Upper driving mechanism
Basic of
D
isassembly
7
Removal of Needle-presser module
1. Remove the two screws (screw, bind M4x8) to remove the IMT holder.
2. Remove the screw (screw, pan (washer) M3x18) from the needle-presser module.
3. Remove the two screws (taptite, bind S M4x10) to remove the presser plate A, and then remove the
two screws (taptite, bind S M4x10) to remove the presser plate B. Remove the needle-presser module
from the arm bed.
4. Remove the shaft from the needle-presser module, and remove the retaining ring E5 from the shaft.
Refer to 3 - 60 Needle-presser module.
Screw, Pan (washer) M3X18
Screw, Bind M4X8
Taptite, Bind S M4X10
Screw, pan (washer) M3x18
Taptite, bind S M4x10
Presser plate B
Screw, bind M4x8
Presser plate A
IMT holder
Taptite, bind S M4x10
Retaining ring E5
Shaft
Needle-presser module
Summary of Contents for BLDY
Page 2: ......