Basic of
D
isassembly
Basic of Disassembly
2 - 26
Lower driving mechanism
Basic of
D
isassembly
2
Removal of Drop unit assy, Feed module and Thread cutter module
1. Remove the retaining ring E2.5 from the shaft of reversal link assy and two screws (taptite, bind S
M4x10) to remove the drop unit assy from the arm bed.
2. Remove the two screws (screw M4) to remove the feed module from the arm bed.
Refer to 3 - 46 Feed module.
3. Cut the two bands and release the each lead wire from the securing fixtures.
4. Remove the two screws (screw, bind M4x5) to remove the thread cutter module from the feed module.
Refer to 3 - 56 Thread cutter module.
Taptite, Bind S M4X10
Screw M4
Screw, Bind M4X5
Retaining ring E2.5
Screw, bind M4x5
Retaining ring E2.5
Screw M4
Feed module
Taptite, bind S
M4x10
Shaft of reversal
link assy
Drop unit assy
Drop unit assy
Thread cutter module
Bands
Summary of Contents for BLDY
Page 2: ......