![background image](http://html1.mh-extra.com/html/baby-lock/bldy/bldy_service-manual_3248103268.webp)
Application of
Assembly
3 - 170
Needle-presser module
Application o
f
Assembly
Application of
Assembly
19
Attachment of Camera relay PCB assy
1. Attach the CMR holder ADJ to the CMR holder base, and then tighten the screw (bolt, socket (S/P
washer) M3x6) temporarily.
*Key point
• Check that the boss part of the CMR holder ADJ engaged with the positioning hole of the CMR holder base.
• Fully tighten the screw after performing
2. Insert the CMR ADJ screw into the washer plain S 3 and the CMR ADJ pin, and then secure them with
the retaining ring E2. Insert the pin of CMR ADJ pin to the holes of the CMR holder ADJ and the CMR
holder base, and then tighten the CMR ADJ screw temporarily.
*Key point
• Fully tighten the CMR ADJ screw after performing
3. Attach the CMR spring plate to the CMR holder ADJ with the screw (screw, pan (S/P washer) M3x6).
4. Set the camera module and the CMR cover cap to the CMR cover, and then attach them to the CMR
holder ADJ with the screw (screw, pan (S/P washer) M3x8).
*Key point
• Insert the tab of the CMR holder ADJ into the positioning hole of CMR cover.
Screw, Pan (S/P washer) M3X8
Screw, Pan (S/P washer) M3X6
Bolt, Socket (S/P washer) M3X6
CMR cover cap
CMR cover
Screw, pan (S/P washer) M3x8
CMR holder ADJ
Camera module
Screw, pan (S/P washer) M3x6
CMR spring plate
CMR ADJ screw
Retaining ring E2
CMR ADJ pin
Washer plain S 3
Bolt, socket
(S/P washer) M3x6
CMR holder base
Pin
Tab
Positioning hole
Tab
Summary of Contents for BLDY
Page 2: ......