Baby Lock BLDY Service Manual Download Page 218

Page: 218 / 311

Application of

Assembly

3 - 120

Needle threading mechanism

Application o

Assembly

Application of

Assembly

Attachment of Thread guard plate B and Thread guide

1. Align the positioning notch of thread guard plate B with the boss of thread tension assy, and attach the

thread guard plate B to the thread tension assy with the screw (screw, bind M3x4). Align the positioning

hole of thread guide with the boss of thread guard plate B, and attach the thread guide to the thread

guard plate B with the screw (screw, bind M3x4).

Screw, Bind M3X4

Thread tension assy

Thread guard plate B

Screw, bind M3x4

Thread guide

Screw, bind M3x4

Summary of Contents for BLDY
























































































































































































































































































































Search results

Summary of Contents for BLDY

Reviews:

Baby Lock BLDY, Service Manual, Page: 218 / 311

Search results

Summary of Contents for BLDY

Reviews: