Application of
Assembly
3 - 187
Feed module
Application o
f
Assembly
Application of
Assembly
7
Attachment of Lock nut, Feed bar assy and Outer rotary hook assy
1. Tighten the screw (set screw, socket (FT) M4x10) until the screw end comes to 1 mm above the lock
nut head. Attach the screw to the feed bar assy, and then attach the cap to the screw.
2. Attach the feed bar assy to the feed arm assy with the two shafts, and secure them with the two screws
(set screw, socket (CP) M4x4).
*Key point
• Make sure that there is no gap at the right and left end of feed arm assy.
3. Attach the spring (XZ0385) to the feed bar assy and vertical feed shaft of drop assy.
Set Screw, Socket (FT) M4X10
SPRING (XZ0385)
Set Screw, Socket (CP) M4X4
Spring (XZ0385)
Shaft
Vertical feed shaft
Cap
Lock nut
1 mm
Feed bar
assy
Feed bar assy
Set screw, socket (CP) M4x4
Spring (XZ0385)
Set screw, socket (FT) M4x10
Set screw, socket (FT) M4x10
Shaft
Lock nut
Feed arm assy
Summary of Contents for BLDY
Page 2: ......