Application of
Disassembly
3 - 54
Feed module
Application o
f
Disassembly
Application of Disassembly
3. Remove the screw (set screw, socket (CP) M4x4) to remove the set collar and F initial shutter from the
shaft of feed adjuster gear assy.
4. Remove the retaining ring E4 from the shaft of feed adjuster gear assy, and then pull out the feed
adjuster gear assy from the FPM holder assy. Remove the spring (XE4082) and washer from the feed
adjuster gear assy.
5. Remove the spring (XC2530) from the feed adjuster and feed gear.
6. Remove the retaining ring 10 from the right side of shaft bushing.
7. Remove the screw (set screw, socket (CP) M4x4) to pull out the shaft bushing from the FPM holder
assy. Remove the two retaining rings 10 from the shaft busing.
SPRING (XE4082)
SPRING (XC2530)
Set Screw, Socket (CP) M4X4
Set screw, socket (CP) M4x4
Set collar
Retaining ring E4
FPM holder assy
Retaining ring 10
Retaining rings 10
Feed adjuster gear assy
Washer
Shaft bushing
Spring (XE4082)
Spring (XC2530)
Feed gear
Feed adjuster
Set screw, socket
(CP) M4x4
F initial shutter
Summary of Contents for BLDY
Page 2: ......