manualshive.com logo in svg

Baby Lock BLDY, Service Manual, Page: 33 / 311

Share
Download
Baby Lock BLDY Service Manual Download Page 33

Basic of 

D

isassembly

Basic of Disassembly

2 - 7

Main frame and covers

Basic of 

D

isassembly

4 

Removal of Belt cover and Belt cover lower assy

1. Remove the screw cover from the belt cover, and remove the two screw caps from the bobbin winder

unit cover.

2. Remove the two screws (screw, bind M4x6) and screw (screw, pan (S/P washer) M4x10). Release the

each hook of belt cover from the each cover to remove the belt cover.

Refer to 3 - 5 "Disassembly of Belt cover assy".

3. Remove the two screws (screw, bind M4x6). Release the each hook of the belt cover lower assy from

the each cover and base plate to remove the belt cover lower assy.

Refer to 3 - 5 "Disassembly of Belt cover lower assy".

Screw, Pan (S/P washer) M4X10

Screw, Bind M4X6

Belt cover

Screw, bind M4x6

Screw, bind M4x6

Screw cap

Hooks

Hooks

Screw cover

Hook

Screw, bind M4x6

Screw, pan 
(S/P washer) 
M4x10

Base plate

Bobbin winder 
unit cover

Hooks

Belt cover lower assy

Hooks

Hooks

Screw cap

Summary of Contents for BLDY
























































































































































































































































































































Reviews:

No comments