Application of
Assembly
3 - 212
Dual feed assy
Application o
f
Assembly
Application of
Assembly
1
Assembly of Dual feed assy
1. Connect the extension code connector to the DF PCB assy and hook the extension code to the guide.
*Key point
• Refer to
2. Set the DF cover L to the dual feed and secure it with the screw (taptite, bind B M3x10). Set the
extension code to the code bracket of the DF cover L.
3. Put the DF belt on the gear 1 and 2 in this order and set the washer thrust2 (two locations) to the
bushing (2 locations). Set the pulley plate B so that its two holes are matched to the two bushings, and
secure them with the two screws (taptite, bind M26x5).
Taptite, Bind B M3X10
Extension code
DF cover L
Code bracket
DF PCB assy
Taptite bind B M3x10
Guide
Dual feed
Taptite, Bind M26X5
Taptite, bind M26x5
Washer thrust2
DF belt
Pulley plate B
Gear 1
Gear 2
Summary of Contents for BLDY
Page 2: ......