manualshive.com logo in svg

Baby Lock BLDY, Service Manual, Page: 223 / 311

Share
Download
Baby Lock BLDY Service Manual Download Page 223

Application of 

Assembly

3 - 125

Bobbin winding mechanism

Application o

f 

Assembly 

Application of 

Assembly 

1 

Assembly of Bobbin winder unit cover assy

1. Set the spool LED reflection sheet, the light plate and the spool LED diffusion plate to the light plate,

and then secure them with the two hooks.

2. Set the RGB LED PCB assy to the light plate cover, and then secure it with the hook.
3. Attach the spool LED dark sheet and the light plate cover with the three screws (taptite, cup B M3x8).

Taptite, Cup B M3X8

Bobbin winder unit cover

Spool LED diffusion 
plate

Spool LED dark sheet

Light plate

Spool LED reflection 
sheet

Light plate cover

RGB LED PCB assy

Hooks

Hook

Taptite, cup B M3x8

Summary of Contents for BLDY
























































































































































































































































































































Reviews:

No comments