B+B SMARTWORK SmartMotion, Configuration Manual

Page: 48 / 144

4. CONFIGURATION
4.4.4 Example of Check Connection Configuration
The figure below displays the following scenario: the connection to the mobile network in
IPv4 IP Mode is controlled on the address 8.8.8.8 with the time interval of 60 seconds for the
first SIM card and on the address www.google.com with the time interval 80 seconds for the
second SIM card.
Ping Timeout is set to default 10 seconds. In case of data stream on the
router, the control pings are not sent, but the data stream is monitored.
Figure 25: Example of Check Connection Configuration
4.4.5 Data Limit Configuration
Item Description
Data limit Specifies the maximum expected amount of data transmitted (sent
and received) over GPRS in one billing period (month).
Warning Threshold Specifies the percentage of the "Data Limit" in the range of 50 % to
99 %. If the data limit is exceeded, the router sends an SMS in the
following form
Router has exceeded (value of Warning Threshold)
of data limit.
Accounting Start Specifies the day of the month in which the billing cycle starts for
the SIM card used. When the service provider that issued the SIM
card specifies the start billing period, the router begins to count
the amount of transferred data starting on this day.
Table 23: Data Limit Configuration
If the parameter
Data Limit
(see below) is set to
don’t care
or
Send SMS when data limit is
exceeded in SMS Configuration is not selected, the Data Limit set here will be ignored.
38