B+B SMARTWORK SmartMotion, Configuration Manual

Page: 19 / 144

3. STATUS
3.2 Mobile WAN Status
The Mobile WAN menu item contains current information about connections to the mobile
network. On the upper part of the page there are
Mobile Network Information for 1st Module
and Mobile Network Information for 2nd Module displayed (information about mobile networks
the router operates in). There are also information about the modules mounted in the router.
Item Description
Registration State of the network registration
Operator Specifies the operator’s network the router operates in
Technology Transmission technology
PLMN Code of operator
Cell Cell the router is connected to
LAC Location Area Code – unique number assigned to each location area
Channel Channel the router communicates on
Signal Strength Signal strength of the selected cell
Signal Quality Signal quality of the selected cell:
•
EC/IO for UMTS (it’s the ratio of the signal received from the pilot
channel – EC – to the overall level of the spectral density, ie the
sum of the signals of other cells – IO)
• RSRQ for LTE technology (Defined as the ratio
N
×
RSRP
RSSI
)
•
The value is not available for the EDGE technology
CSQ Cell Signal Quality, relative value is given by RSSI (dBm). 2–9 range
means Marginal, 10–14 range means OK, 15–16 range means Good,
20–30 range means excellent.
Neighbours Signal strength of neighboring hearing cells
Manufacturer Module manufacturer
Model Type of module
Revision Revision of module
IMEI IMEI (International Mobile Equipment Identity) number of module
MEID MEID number of module
ICCID Integrated Circuit Card Identifier is international and unique serial
number of the SIM card.
Table 4: Mobile Network Information for 1st/2nd Module
9