B+B SMARTWORK SmartMotion, Configuration Manual

Page: 29 / 144

3. STATUS
Item Description
lease Assigned IPv4 address
iaaddr Assigned IPv6 address
starts Time that the IP address was assigned
ends Time that the IP address lease expires
hardware ethernet Unique hardware MAC address
uid Unique ID
client-hostname Host computer name
Table 13: DHCP Status Description
3.7 IPsec Status
Selecting the IPsec option in the status menu of the web page will bring up the information
for any IPsec Tunnels that have been established. If the tunnel has been built correctly, the
screen will display
IPsec SA established
(highlighted in red in the figure below.) If there is no
such text in log, the tunnel was not created!
Figure 7: IPsec Status
3.8 DynDNS Status
The router supports DynamicDNS using a DNS server on www.dyndns.org. If Dynamic
DNS is configured, the status can be displayed by selecting menu option DynDNS. Refer to
www.dyndns.org for more information on how to configure a Dynamic DNS client.
You can use the following listed servers for the Dynamic DNS service. It is possible to use the
DynDNSv6 service with
IP Mode switched to IPv6 on DynDNS Configuration page.
19