B+B SMARTWORK SmartMotion, Configuration Manual

Page: 59 / 144

4. CONFIGURATION
Continued from previous page
Item Description
Country Code Code of the country where the router is installed. This code must be
entered in ISO 3166-1 alpha-2 format. If a
country code isn’t specified
and the router has not implemented a system to determine this code,
it will use "US" as the default
country code .
If no country code is specified or if the wrong country code is entered,
then the router violate country-specific regulations for the use of the
WiFi frequency bands.
HW Mode HW mode of WiFi standard that will be supported by WiFi access
point.
• IEE 802.11b
•
IEE 802.11b+g
• IEE 802.11b+g+n
•
IEE 802.11a
•
IEE 802.11a+n
Channel The channel, where the WiFi AP is transmitting.
BW 40 MHz The option for HW mode 802.11n which allows transmission on two
standard 20 MHz channels simultaneously. The option is also avail-
able in the STA mode and it has to be enabled in both the AP and the
STA mode if using the high throughput mode.
WMM Basic QoS for WiFi networks is enabled by checking this item. This
version doesn’t guarantee network throughput. It is suitable for sim-
ple applications that require QoS.
Authentication Access control and authorization of users in the WiFi network.
•
Open – Authentication is not required (free access point).
• Shared – Base authentication using WEP key.
•
WPA-PSK – Authentication using better authentication meth-
ods PSK-PSK.
•
WPA2-PSK – WPA-PSK using new encryption AES.
Continued on next page
49