7. TYPICAL SITUATIONS
Figure 90: Backup access to the Internet – WLAN configuration
Mobile WAN configuration
To configure the mobile connection it should be sufficient to in-
sert the SIM card into the
SIM1
slot and attach the antenna to the
ANT
connector. (Depending
on the SIM card you are using).
To set up backup routes you will need to enable Check Connection in the
Mobile WAN
item. (See Fig.
.) Set the
Check connection
option to
e bind
and fill in an IP address
of the mobile operator’s DNS server or any other reliably available server and enter the time
interval of the check. For detailed configuration, see Chapter
Figure 91: Backup access to the Internet – Mobile WAN configuration
122
Summary of Contents for SmartMotion
