Avaya P330, Reference Manual

Page: 52 / 360

Chapter 2 Avaya P330 Layer 2 CLI Commands
34 Avaya P330 Reference Guide
no username
User level: supervisor
Use the
no username
command to remove a local user account.
The syntax for this command is:
no username <name>
Example:
If you wish to delete a name which includes spaces, you must enclose the entire
name in quotation marks, for example “new york”.
L
You cannot delete the default user account “root”.
nvram initialize
User level: privileged, supervisor.
Use the
nvram initialize
command to reset the configuration parameters to
their factory defaults.
The syntax for this command is:
nvram initialize {switch | all}
Example:
name User name
P330-1(super)# no username john
User account removed.
switch Resets all the switching parameters (Layer 2 only) throughout the
stack
all Resets all parameters including licenses and routing parameters of
the Layer 3 switches present in the stack
P330-N# nvram initialize
This command will restore factory defaults, and can
disconnect your telnet session
*** Reset *** - do you want to continue (Y/N)? y
Connection closed by foreign host