Avaya P330, Reference Manual

Page: 89 / 360

Chapter 2 Avaya P330 Layer 2 CLI Commands
Avaya P330 Reference Guide 71
Example:
set port powerline
User level: privileged, supervisor.
L
This command is available on P333T-PWR switches only
Use the
set port powerinline
command to enable or disable the load detection
process and power delivery for the port.
The syntax for this command is:
set port powerinline <module_number/port_number> {[enable] |
disable}
Example:
set port powerline priority
User level: privileged, supervisor.
L
This command is available on P333T-PWR switches only
Use the
set port power inline priority
command to configure the priority
level of powering the port. Possible values are Critical, High, and Low. At power on
all ports are set to Low Priority.
Within each group, the lowest port number has a highest priority, i.e. within the
ports 1 to 8, port 1 has the highest priority although its priority is lower than port 9
which belongs to High priority group.
P330-N# set port point-to-point admin status 1/1 force-true
port 1/1 point to point admin status is set to force-true
module_
number Number of the module hosting the port for which load detection is to
be enabled/disabled.
port_nu
mber Number of the port for which load detection should be enabled/
disabled.
enable - enables load detection process for port
disable - disables load detection process for port
P330-N# set port powerinline 3/1-3 enable
Load detection process on ports 3/1-3 is enabled