Avaya P330, Reference Manual

Page: 207 / 360

Chapter 3 Avaya P330 Layer 3 CLI Commands
Avaya P330 Reference Guide 189
Use the
no ip unicast cache
command to return to the default value.
The syntax for this command is:
[no] ip unicast cache update-timeout interval
Example:
ping
User level: user, privileged, supervisor
Use the
ping
command to send ICMP echo request packets to another node on the
network.
L
You can use this command via the master switch only.
L
The command is executed until you
The syntax for this command is:
ping <host> [<interval> [<size> [<timeout> [<source
address>]]]]]
Router-N(configure)# ip unicast cache update-timeout 600
Done!
host Host IP address/Internet address of route destination. If missing
then the last host IP is used.
interval Interval between ping commands in seconds (1 to 256)
size Size of packet in bytes (22 to 66500)
timeout Timeout in seconds (1 to 10)
source
address IP address of one of the router interfaces