Chapter 2 Avaya P330 Layer 2 CLI Commands
84
Avaya
P330 Reference Guide
set queuing scheme
User level: privileged, supervisor.
L
This command is applicable to P330-ML switches only.
Use the
set queuing scheme
command to set the queuing scheme to either strict
or weighted round robin and to set the weights.
L
If this command is to be implemented on a P330-ML switch other than the stack
master, a session should be opened to the relevant switch.
The syntax for this command is:
set queuing scheme {strict | wrr} [ratio]
Example:
set radius authentication enable/disable
User level: supervisor
Enables or disables RADIUS authentication for the P330 switch.
The syntax for this command is:
set radius authentication {enable|disable}
Example:
stric/twr
Sets queuing scheme to strict or weighted round robin
ratio
Ratio between high and low priority queues
P330-N#
set queuing scheme strict
Queuing scheme is set to strict
P330-N#
set queuing scheme wrr 8
Queuing scheme is set to wrr 8
enable
Enable RADIUS authentication
disable
Disable RADIUS authentication (default)
P330-1(super)#
set
radius
authentication
enable
Summary of Contents for P330
