Chapter 3 Avaya P330 Layer 3 CLI Commands
244
Avaya
P330 Reference Guide
ip rip authentication mode
User level: privileged, supervisor.
Use the
ip rip authentication
command to specify the type of authentication
used in RIP Version 2 packets.
Use the
no ip rip authentication
command to restore the default value of
none.
The syntax for this command is:
[no] ip rip authentication mode
[simple|none]
Example:
To specify simple authentication to be used in RIP Version 2 packets on the interface
“marketing”.
ip rip default-route-mode
User level: privileged, supervisor.
Use the
ip rip default-route-mode
command to enable learning of the
default route received by the RIP protocol. The default state is talk-listen.
Use the
no ip rip default-route-mode
command to disable learning of the
default route.
The syntax for this command is:
ip rip default-route-mode <mode>
The possible default route modes on an interface are:
simple|none
The authentication type used in RIP Version 2 packets:
• simple - clear text authentication.
• none - no authentication.
Router-N(configure-if:marketing) #
ip
rip
authentication
mode
simple
talk-listen
Set RIP to send and receive default route updates on
the interface.
talk-only
Set RIP to send but not receive default route updates
on the interface.
Summary of Contents for P330
