![background image](http://html.mh-extra.com/html/avaya/p330/p330_reference-manual_3026953197.webp)
Chapter 3 Avaya P330 Layer 3 CLI Commands
Avaya
P330 Reference Guide
179
ip access-list-dscp operation
User level: privileged, supervisor.
Use the
ip access-list-dscp operation
command to set a DSCP to CoS
mapping.
L
On the P334T-ML, the system performs the mapping for only those frames than
match an ACL rule with a “permit” action.
The syntax for this command is:
ip access-list-dscp operation <policy-list-number> <dscp>
<action>
Example:
ip access-list-dscp trust
User level: privileged, supervisor.
Use the
ip access-list-dscp trust
command to decide which original
frame fields influence the selection of packet priority.
L
This command does not apply to the P333R.
The syntax for this command is:
policy-
list-
number
A valid id number for a policy list currently defined for the module
(100 - 149)
dscp
Range of dscp. For example:
<dscp-range> : [0 - 63] | <low-dscp>-<high-dscp> <low-dscp>-<low-
dscp>: apply the map to all packets with DSCP from <low-dscp> to
<high-dscp>.
action
<action> = permit | deny | deny-and-notify | fwd0 | fwd1 - fwd7
• permit: do nothing, let the packet pass:
• deny: drop the packet
• deny-and-notify: drop the packet and send an SNMP trap
• fwd0, fwd1fwd7: Set the frame COS field to 0,7
Router-N(configure)#
ip access-list-dscp operation 101
0-63
permit
Router-N(configure)#
ip access-list-dscp operation 101 62
fwd5
Summary of Contents for P330
