Avaya P330, Reference Manual

Page: 334 / 360

Chapter 4 Load Balancing CLI Commands
316 Avaya P330 Reference Guide
virtual-fw-service hc-ip
User level: privileged, supervisor
Use the
hc-ip
command to set the health check IP addresses for the virtual
firewall service.
The syntax for this command is:
hc-ip <my-ip> <partner-ip>
Example:
virtual-fw-service id
User level: privileged, supervisor
Use the
id
command to set the identification number and type for the virtual
firewall service.
The syntax for this command is:
id <id> [bridging-fw]
Example:
my-ip My IP address.
partner-ip Partner’s IP address.
Router-N(configure)# hc-ip 10.10.1.2 10.20.2.3
id Identification number for the virtual firewall service, an
integer from 1 to 1024.
bridging-fw Add this parameter to configure a bridging firewall type. If
this parameter is not included in the command, a routing
firewall type is configured.
Router-N(configure)# id 1 bridging-fw