Avaya P330, Reference Manual

Page: 78 / 360

Chapter 2 Avaya P330 Layer 2 CLI Commands
60 Avaya P330 Reference Guide
Example:
set port classification
User level: privileged, supervisor.
Use the
set port classification
command to set the port classification to
either regular or valuable. Any change in the Spanning Tree state from Forwarding
for a valuable port will erase all learnt MAC addresses in the stack.
The syntax for this command is:
set port classification [module/port] {regular|valuable}
Example:
set port disable
User level: privileged, supervisor.
Use the
set port disable
command to disable a port or range of ports.
The syntax for this command is:
set port disable <mod_num>/<port_num>
P330-N# set port channel 1/5-6,8 on my-channel
Port 1/5 channel mode set to on 1/102
Port 1/6 was added to channel 1/102
Port 1/8 was added to channel 1/102
module port module/port range
regular | valuable port classification
P330-N# set port classification 2/19 valuable
Port 2/19 classification has been changed.
module Number of the switch in the stack.
port Number of the port on the module. If you do not specify a
number, all the ports on the swtiches are shown.
You can also specify a range of ports separated by a dash, for
example, 4/5-13 for ports 5 to 13 on switch 4.