Avaya P330, Reference Manual

Page: 255 / 360

Chapter 3 Avaya P330 Layer 3 CLI Commands
Avaya P330 Reference Guide 237
ip address
User level: privileged, supervisor.
Use the
ip address
command to assign an IP address and mask to an interface.
The syntax for this command is:
ip address <ip-address> <mask> [<admin-state>]
Example:
To assign the IP address 192.168.22.33 with mask 255.255.255.0 to the interface
“marketing”:
ip admin-state
User level: privileged, supervisor.
Use the
admin-state
command to set the administrative state of an IP interface.
The default state is up .
The syntax for this command is:
ip admin-state <up/down>
Example:
ip address The IP address assigned to the interface.
mask Mask for the associated IP subnet
admin-state The administration status – either Up or Down
Router-N(config-if:marketing)# ip address 192.168.22.33
255.255.255.0
Done!
up/down Administrative state of the interface.
The choices are
• up (active) or
• down (inactive).
Router-N(config-if:marketing)# ip admin-state up