Setting Up the System
Configuring System Setup Parameters
Octel 50 Installation Guide
8-38
Fax Parameters - #60
Fax Mail Allowed
This parameter determines whether Octel 50 system
subscribers are permitted fax mail.
When/How to Use
This parameter permits fax mail for all mailboxes on the
Octel 50 system. Mailboxes must also be enabled for send
or receive faxes in the class of service.
Related Parameters/Features
None.
If Set Too High
Not applicable.
If Set Too Low
Not applicable.
Min
–
Max
–
Default
No
Requires
Restart
No
Switch-
Dependent
No
Set by
Integrator
No
Fax Parameters - #61
Use a Fax Cover
Sheet
This parameter specifies whether the Octel 50 system
attaches a fax cover sheet when it delivers faxes retrieved
from a V-Tree.
When/How to Use
If you enable this parameter, you must create a system-wide
fax cover sheet. You can only have one fax cover sheet in
the system.
Related Parameters/Features
A Fax cover sheet is not sent from a V-Tree when Use
Immediate Fax Delivery Mode in V-Trees is enabled.
If Set Too High
Not applicable.
If Set Too Low
Not applicable.
Min
–
Max
–
Default
No
Requires
Restart
No
Switch-
Dependent
No
Set by
Integrator
No
Fax Parameters - #62
Number of
Attempts when
Sending a Fax
This parameter specifies the number of times the Octel 50
system attempts to send a fax for V-Tree fax retrieval and
fax mail when it encounters a busy or no answer condition
at the destination fax machine.
When/How to Use
The default should be acceptable for most systems.
If you set this parameter to 0, and the Octel 50 system
encounters a busy or no answer condition at the destination
fax machine, the fax is not delivered.
Related Parameters/Features
The Fax Delivery Retry Delay (Minutes) determines how
long the Octel 50 system waits between attempts to deliver
a fax.
If Set Too High
The maximum is the default value for this parameter.
If Set Too Low
The Octel 50 system may be unable to deliver the fax.
