Configuring Dial Plan
Deleting a Prefix
Octel 50 Installation Guide
6-3
Deleting a Prefix
Use the following procedure to delete a prefix from Dial Plan after Octel 50 installation.
To delete a Dial Plan prefix:
1. Shut down the Octel 50 system if it is running. The \CVR prompt displays.
2. From the \CVR prompt, type
DIALPLAN
and press <ENTER>. The Local
Telephone Information dialog box displays.
3. Press the down arrow key to move to the field that contains the prefix you want to
delete. The prefix field is highlighted.
4. To delete the highlighted prefix, use the arrow or <TAB> keys to highlight the Remove
button, then press <ENTER>.
5. To save the configuration and exit the Dial Plan utility, select Done.
Activating Dial Plan
Use the following procedure to activate the Dial Plan utility.
To activate Dial Plan:
1. If the Octel 50 system is currently running, make sure you are logged in as a level 3
supervisor, then select System Setup from the Options menu. If the Octel 50 system
is not currently running, from the \CVR prompt, type
SETUP
and press <ENTER>.
The System Setup dialog box displays.
2. Select Change System Setup. The first page of System Setup parameters displays.
3. Use the down arrow or Page Down key to move to the Use Dial Plan parameter.
4. To activate the Use Dial Plan parameter, press <SPACEBAR> to place a check in the
box.
