Understanding Phrase Files and Using V-Edit
Using Dialogic V-Edit
Octel 50 Installation Guide
14-28
to stop recording before you reach the phrase number you specified in step 4, press
<ESC> at the prompt to record the next phrase, rerecord the existing phrase, or exit.
Adding Blank Phrases to a Phrase File
V-Edit’s Compress option allows you to add additional blank phrases to the current
phrase file. This option is helpful if you want to record additional phrases in a file, but have
reached the maximum number of phrases you specified when you opened the file. The
maximum number of phrases allowed in a file is 3000.
To add blank phrases to the current phrase file:
1. Open the phrase file in which you add phrases, if it is not already open.
2. From the Main menu, press <C>.
3. When prompted to enter the maximum number of phrases, enter the total number of
phrases for the open phrase file, then press <ENTER>. Make sure you allow for any
phrases you may want to add to the file.
V-Edit then compresses the file to allow for the number of phrases you specified.
Listening to Phrases
You can listen to a phrase in its entirety or only listen to a selected portion of the phrase.
To listen to an existing phrase in its entirety:
1. Open the phrase file in which you want to review phrases, if it is not already open.
2. From the Main menu, press <E> to access the Edit menu. The first phrase in the file
is graphically displayed.
3. To select a phrase, press <N>.
4. At the phrase prompt, enter the number of the phrase you want to review, then press
<ENTER>. The selected phrase is graphically displayed.
5. To review the phrase, press <P>. The phrase voices.
6. To review the previous phrase in the file, press <->, then repeat step 5. To review the
next phrase in the file, press <+>, then repeat step 5. To select and review other
phrases in the same file, repeat steps 3 through 5.
To listen to a selected portion of a phrase:
1. Open the phrase file in which you want to review phrases, if it is not already open.
2. From the Main menu, press <E> to access the Edit menu. The first phrase in the file
is graphically displayed.
3. To select a phrase, press <N>.
4. At the phrase prompt, enter the number of the phrase you want to review, then press
<ENTER>. The selected phrase is graphically displayed.
5. Select the portion of the phrase you want to hear. For information on selecting part of
a phrase, see the topic, “Selecting a Portion of a Phrase,” later in this chapter.
6. To review the phrase, press <P>. The phrase voices.
