manualshive.com logo in svg

Avaya Octel 50, Installation Manual

The Avaya Octel 50 is a high-performance communication system designed to meet your business needs. Simplify installation and setup with our comprehensive Installation Manual, available for free download on our website. Access the manual today to unlock the full potential of your Avaya Octel 50.

Share
Download
background image

Understanding Phrase Files and Using V-Edit

Using Dialogic V-Edit

Octel 50 Installation Guide

14-25

b.   Press <ALT+F> to view the File menu options.

c.   From the File menu, use the down arrow key to select Exit, then press <ENTER>.

The Shutdown System dialog box displays.

d.   Select Shutdown, then press <ENTER>. The system shutdown completes and

the \CVR prompt displays.

2.  Insert the V-Edit Installation diskette in the diskette drive.

3.  From the \CVR directory prompt, type

 MD VEDIT 

then press <ENTER>.

4.  From the \CVR directory prompt, type

 CD VEDIT 

then press <ENTER>.

5.  From the \VEDIT directory prompt, type

 COPY A:*.* 

(where

 A 

is the diskette

drive) then press <ENTER>. The files from the diskette are copied to the \VEDIT
directory.

Preparing Existing Phrase Files for Use with V-Edit

If you want to edit one of the existing phrase files, [Language]1.VOX, [Language]2.VOX,
or [Language]3.VOX, complete the following procedure to back up the existing file and
copy it to the \VEDIT directory for use with V-Edit.

To prepare an existing phrase file for use with V-Edit:

1.  Shut down the Octel 50 system if it is currently running:

a.   If the Mailbox Status screen is open and the Exit button is highlighted, press

<ENTER>. The Mailbox Status screen closes and the menu bar is activated with
the File menu highlighted.

b.   Press <ALT+F> to view the File menu options.

c.   From the File menu, use the down arrow key to select Exit, then press <ENTER>.

The Shutdown System dialog box displays.

d.   Select Shutdown, then press <ENTER>. The system shutdown completes and

the \CVR prompt displays.

2.  Back up the existing language file you want to modify. For example, to back up the

SO3-D2.VAP file to another filename on the same hard drive, from the \CVR directory
prompt, type

 COPY SO3-D2.VAP SO3-D2.BAK 

then press <ENTER>.

3.  Copy the phrase file to the \VEDIT directory. For example, to copy the backup created

in the example in step 2, from the \CVR directory prompt, type

 COPY SO3-D2.VAP

\VEDIT 

then press <ENTER>. The file is copied to the \VEDIT directory.

Starting Dialogic V-Edit

Use the following procedure to start Dialogic V-Edit.

To launch Dialogic V-Edit:

1.  Shut down the Octel 50 system if it is currently running.

a.   If the Mailbox Status screen is open and the Exit button is highlighted, press

<ENTER>. The Mailbox Status screen closes and the menu bar is activated with
the File menu highlighted.

b.   Press <ALT+F> to view the File menu options.

Summary of Contents for Octel 50

















































































































































































































































































































Reviews:

No comments

Related manuals for Octel 50

Brands by name

Popular brands

Load more brands