Avaya Compact Contact Center Installation Manual Download

Page: 70 / 70

Performance figures and data quoted in this document are typical, and must be

specifically confirmed in writing by Avaya before they become applicable to any

particular order or contract. The company reserves the right to make alterations or

amendments to the detailed specifications at its discretion. The publication of

information in this document does not imply freedom from patent or other

protective rights of Avaya, or others.

Intellectual property related to this product (including trademarks) and registered to

Lucent Technologies has been transferred or licensed to Avaya.

All trademarks identified by ® or TM are registered marks or trademarks,

respectively, of Avaya Inc. All other trademarks are the property of their respective

owners.

This document contains propriety information of Avaya and is not to be disclosed

or used except in accordance with applicable agreements.

Any comments or suggestions regarding this document should be sent to

"[email protected]".

Avaya

Sterling Court

15 - 21 Mundells

Welwyn Garden City

Hertfordshire

AL7 1LZ

England

Tel: +44 (0) 1707 392200

Fax: +44 (0) 1707 376933

Email: [email protected]

Web: http://www.avaya.com

Compact Contact Center Installation Manual

40DHB0002USBG Issue 4a (05/29/2003)

Summary of Contents for Compact Contact Center







































































Search results

Summary of Contents for Compact Contact Center

Reviews:

Related manuals for Compact Contact Center

Brands by name

Popular brands

Avaya Compact Contact Center, Installation Manual

Search results

Summary of Contents for Compact Contact Center

Reviews:

Related manuals for Compact Contact Center

Brands by name

Popular brands