Avaya Compact Contact Center Installation Manual Download

Page: 28 / 70

Page 28 - Installation of CCC Components

Installing CCC Components

Installation of CCC Components

When all the PC configuration procedures (see page 14) have been performed,
commence CCC Application installation on the Server, then the Client PCs and finally
the optional PC wallboard application on the Agents PCs.

Note:

Only install CCC Components on a Server PC that is operating either as a

local

machine

or within a

domain

. Do not spread installation over both.

Server PC Installation

To install the required CCC applications on the Server PC, perform the following:-

1. With Windows running, insert the

Application CD

into the CD Drive. Use the My

Computer facility to view the CD drive. Within the CCC Folder, find and double
click on

Setup.exe.

2. Choose the appropriate setup language and click on

3. The InstallShield Wizard will run. At the Welcome screen click on

Next

to continue.

4. The Select Components menu is displayed:

For installation of the MultiMedia Module, refer to the separate Installation Manual.

5. Choose, from the table below, the appropriate applications for your Server/Client

configuration (tick/un-tick as required). For Client application options, see page 30.

Server PC (with up to 5 Client PCs)

Standalone Server

Wallboard Server

Call Center View

Report Manager*

PC Wallboard

Delta Server

Wallboard Server

Database Server Supervisor

Delta Server

Workforce Management (optional)****

Report Manager**
Report Client***
Database Server Supervisor

Note:

When CCV Alarm Reporter is

unticked, ensure that Call Centre
View is also unticked.

CCV Alarm reporter

Notes: *

Report Client will be grayed out as it is part of Report Manager.

Install Report Manager when Report Designer function is required.

***

Install Report Client when

only

bespoke 'Reports' are to be used.

****

Workforce Management could be installed on a standalone Server or

on a Client PC (see page 30).

Report Manager & Report Viewer must be installed in the same
language.

Page 28 - Installation of CCC Components

Compact Contact Center Installation Manual

Installing CCC Components

40DHB0002USBG Issue 4a (05/29/2003)

Summary of Contents for Compact Contact Center







































































Search results

Summary of Contents for Compact Contact Center

Reviews:

Related manuals for Compact Contact Center

Brands by name

Popular brands

Avaya Compact Contact Center, Installation Manual

Search results

Summary of Contents for Compact Contact Center

Reviews:

Related manuals for Compact Contact Center

Brands by name

Popular brands