DL06 Micro PLC User Manual, 3rd Edition, Rev. E
5-193
Chapter 5: Standard RLL Instructions
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
Bit element
This is used for printing the state of the designated bit in V-memory or a relay bit. The
bit element can be assigned by the designating point (.) and bit number preceded by the
V-memory number or relay number. The output type is described as shown in the table below.
Example:
V2000 . 15 Prints the status of bit 15 in V2000, in 1/0 format
C100 Prints the status of C100 in 1/0 format
C100 : BOOL Prints the status of C100 in TRUE/FALSE format
C100 : ON/OFF Prints the status of C100 in ON/OFF format
V2000.15 : BOOL Prints the status of bit 15 in V2000 in TRUE/FALSE format
The maximum numbers of characters you can print is 128. The number of characters for each
element is listed in the table below:
The handheld programmer’s mnemonic is “PRINT” followed by the DEF field.
Special relay flags SP116 and SP117 indicate the status of the DL06 CPU ports (busy, or
communications error). See the appendix on special relays for a description.
NOTE: You must use the appropriate special relay in conjunction with the PRINT command to ensure
the ladder program does not try to PRINT to a port that is still busy from a previous PRINT or WX or
RX instruction.
#
Data Format
Description
1
none
Print 1 for an ON state, and 0 for an
OFF state
2
:BOOL
Print “TRUE” for an ON state, and
“FALSE” for an OFF state
3
:ONOFF
Print “ON” for an ON state, and
“OFF” for an OFF state
Element Type
Maximum Characters
Text, 1 character
1
16 bit binary
6
32 bit binary
11
4 digit BCD
4
8 digit BCD
8
Floating point (real number)
12
Floating point (real with exponent)
12
V-memory/text
2
Bit (1/0 format)
1
Bit (TRUE/FALSE format)
5
Bit (ON/OFF format)
3
