DL06 Micro PLC User Manual, 3rd Edition, Rev. E
5-291
Chapter 5: Standard RLL Instructions
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
ECEMSUP Example (cont’d)
Rung 2: Whenever an EStop is pushed, ensure that president of the company gets copies
of all EMails being sent.The ECOM100 EMail Setup IBox allows you to set/change the
SMTP EMail settings stored in the ECOM100. The ECEMSUP is leading edge triggered,
not power-flow driven (similar to a counter input leg). At power-up, the ROM based EMail
configuration stored in the ECOM100 is copied to a RAM based “working copy”. You can
change this working copy by using the ECEMSUP IBox. To restore the original ROM based
configuration, use the Restore Default EMail Setup ECEMRDS IBox.
If successful, turn on C100. If there is a failure, turn on C101. If it fails, you can look at
V2000 for the specific error code.
Rung 3: Once the EStop is pulled out, take the president off the cc: list by restoring the
default EMail setup in the ECOM100.
