DL06 Micro PLC User Manual, 3rd Edition, Rev. E
3-30
Chapter 3: CPU Specifications and Operation
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
System
V-memory
Description of Contents
Default
Values /
Ranges
Read
Only
R/W
V7656
Port 2: Setup for the station number, baud rate, STOP bit, and parity
R/W
V7657
Port 2: Setup completion code used to notify the completion of the parameter setup
0400h reset
port 2
R/W
V7660
Scan control setup: Keeps the scan control mode
R/W
V7661
Setup timer over counter
R
V7662–V7710
Reserved
R/W
V7711-V7717
DirectSOFT I-Box instructions work area
R
V7720–V7722
Locations for DV–1000 operator interface parameters
R/W
V7720
location for DV-1000 operation interface Titled Timer preset value pointer
R/W
V7721
DV-1000: Title Counter preset value pointer
R/W
V7722
DV-1000: Hibyte-Titled, Lobyte-Timer preset block size
R/W
V7723–V7725
DirectSOFT I-Box instructions work area
R
V7726
Reserved
R/W
V7727
Version No
R
V7730
D0-DCM Module Slot1 Auto Reset Timeout
R/W
V7731
D0-DCM Module Slot2 Auto Reset Timeout
R/W
V7732
D0-DCM Module Slot3 Auto Reset Timeout
R/W
V7733
D0-DCM Module Slot4 Auto Reset Timeout
R/W
V7734-V7737
Reserved
R/W
V7740
Port 2: Communication Auto Reset Timer Setup
Default: 3030
R/W
V7741
Reserved
R/W
V7742
LCD Various LCD setting flags
R/W
V7743
V Memory address in which the default display message is stored as set
R/W
V7744-V7746
Reserved
R/W
V7747
Location contains a 10 ms counter (0-99). This location increments once every 10 ms
R
V7750
Reserved
R/W
V7751
Fault Message Error Code
R
V7752
I/O Configuration Error: stores the module ID code for the module that does not the current configuration
R
V7753
I/O Configuration Error: stores the module ID code
R
V7754
I/O Configuration Error: identifies the base and slot number
R
V7755
Error code — stores the fatal error code
R
V7756
Error code — stores the major error code
R
V7757
Error code — stores the minor error code
R
V7760–V7762
Reserved
R/W
V7763
Program address where syntax error exists
R
V7764
Syntax error code
R
V7765
Scan counter — stores the total number of scan cycles that have occurred since the last Program Mode to
Run Mode transition (in decimal)
R
V7766
Contains the number of seconds on the clock (00-59)
R
V7767
Contains the number of minutes on the clock (00-59)
R
V7770
Contains the number of hours on the clock (00-23)
R
V7771
Contains the day of the week (Mon., Tues., Wed., etc.)
R
V7772
Contains the day of the month (01, 02, etc.)
R
V7773
Contains the month (01 to 12)
R
V7774
Contains the year (00 to 99)
R
V7775
Scan — stores the current scan time (milliseconds)
R
V7776
Scan — stores the minimum scan time that has occurred since the last Program Mode to Run Mode
transition (milliseconds)
R
V7777
Scan — stores the maximum scan rate since the last power cycle (milliseconds)
R
