AudioCodes 310HD Page 106 Administrator'S Manual Download

Page: 106 / 284

310HD, 320HD and 420HD IP Phones

Administrator's Manual

106

Document #: LTRT-09910

Parameter

Description

Secondary Dial Tone

[voip/dialing/secondary_dial_tone/enabled]

Enables the secondary dial tone.

[0] Disable - Phone doesn't use secondary
dial tone.

[1] Enable (default) - Phone plays secondary
dial tone if the secondary dial tone key is
pressed (first digit).

Secondary Dial Tone Key

[voip/dialing/secondary_dial_tone/key_seq
uence]

Defines the secondary dial tone is played if this is
the first key pressed.

The valid range is 0 to 9. The default value is 9.

Note: This parameter is available only if the
parameter
voip/dialing/secondary_dial_tone/enabled is
set to 1.

Out of Service Behavior

[voip/services/out_of_service_behavior]

Determines whether a reorder tone is played
instead of a dial tone if you configured a
Registrar IP address and the registration failed.

[NONE] No Tone

[REORDER_TONE] Reorder Tone (default)

Stutter Tone Duration

[voip/services/msg_waiting/stutter_tone_d
uration]

Defines the duration for which a stutter tone is
played when you have unheard messages.

The valid range is 1000 to 60000.
The default value is 2500.

Automatic Disconnect

[voip/dialing/automatic_disconnect]

Determines whether the phone automatically
goes idle (i.e. on-hook) when the last remaining
call is disconnected. This is only relevant when
the speaker or headset is used.

[0] Disable

[1] Enable(default)

http://arttel.ru

Summary of Contents for 310HD





























































































































































































































































































Search results

Summary of Contents for 310HD

Reviews:

Related manuals for 310HD

Brands by name

Popular brands

AudioCodes 310HD, Administrator'S Manual

Search results

Summary of Contents for 310HD

Reviews:

Related manuals for 310HD

Brands by name

Popular brands