AudioCodes 310HD, Administrator'S Manual, Page: 140 / 284

310HD, 320HD and 420HD IP Phones
22.5 Configuring Automatic Dialing
Automatic Dialing can be configured using the Web or Configuration File, as described
below.
¾
To define the Automatic Dialing parameters:
„
Using the Web:
1. Access the ‘Dialing’ page (Configuration tab > Voice Over IP menu > Dialing).
Figure 22-4: Automatic Dialing Web Fields
2. Configure dialing options according to the parameters in the table below, and
then click Submit.
„
Using the Configuration File:
Table 22-4: Automatic Dialing Parameters
Parameter Description
Activate
[voip/dialing/auto_dialing/enabled]
Determines whether automatic dialing is enabled (i.e.,
phone number is automatically dialed when you off-
hook the phone).
ƒ [0] Disable (default)
ƒ [1] Enable
Timeout
[voip/dialing/auto_dialing/timeout]
Timeout (in seconds) before automatic dialing occurs
after the phone is off-hooked. When set to 0,
automatic dialing is performed immediately.
The valid range is 0 to 120. The default value is 15.
Destination Phone Number
[voip/dialing/auto_dialing/destination]
The number that is automatically dialed when the
phone is off-hooked.
The valid value can be up to 32 characters.
Administrator's Manual 140 Document #: LTRT-09910
http://arttel.ru