AudioCodes 310HD Administrator'S Manual Download Page 152

Page: 152 / 284

310HD, 320HD and 420HD IP Phones

23.2 Configuring Tone Volume

Tone volume can be configured using the Web or Configuration File, as described below.

To configure tone volume:

„

Using the Web:

Access the ‘Volume Setting’ page (Configuration tab > Voice Over IP menu >
Volume Settings).

Figure 23-2: Tone Volume Web Field

Configure the tones volume settings according to the parameters in the table
below, and then click Submit.

„

Using the Configuration file:

Table

23-2: Tone Volume Parameter

Parameter

Description

Tone Volume

[voip/audio/gain/tone_signal_level]

Call progress tone volume. This volume can be modified
on-the-fly by pressing the phone’s VOLUME key in certain
scenarios.

The valid range is 1 to 31 (-dB). The default value is 10 (-
10dB).

Administrator's Manual

152

Document #: LTRT-09910

http://arttel.ru

Summary of Contents for 310HD





























































































































































































































































































Search results

Summary of Contents for 310HD

Reviews:

AudioCodes 310HD, Administrator'S Manual, Page: 152 / 284

Search results

Summary of Contents for 310HD

Reviews: