AudioCodes 310HD Page 67 Administrator'S Manual Download

Page: 67 / 284

Administrator's Manual

12. Configuring Date and Time

12.2 Configuring Network Time Protocol Server

The Network Time Protocol (NTP) server can be configured using the Web or
Configuration File, as described below.

To configure the Network Time Protocol Server:

„

Using the Web:

Access the ‘Date and Time’ page (Configuration tab > Advanced Applications
menu > Date and Time).

Configure the Network Time Protocol Server according to the parameters in the
table below, and then click Submit.

Figure

12-2: NTP and Time Settings Web Fields

„

Using the Configuration File:

Table

12-2: NTP Server Parameters

Parameter

Description

Active

[system/ntp/enabled]

Enables the NTP server from which the phone
retrieves the date and time.

[0] Disable (default)

[1] Enable – obtains the time information from a
configured NTP server

Primary Server

[system/ntp/primary_server_address]

Defines the address of the main NTP server (this
can be a domain name, for example,
tick.nap.com.ar).

Secondary Server

[system/ntp/secondary_server_address]

Defines the address of the secondary NTP server.

Update Interval

[system/ntp/sync_time]

This sub-section defines how often the phone must
perform an update with the NTP server.

[days] -

defines the number of days

[hours] - defines the number of hours

For example: To configure the phone to perform an
update with an NTP server every 1 day and 6 hours,
set the following:

system/ntp/sync_time/days=1

system/ntp/sync_time/hours=6

Update Interval

[system/ntp/sync_time/days]

The number of days.

The valid range is 0 to 7. The default of days is 0.

Version 2.0.0

October 2012

http://arttel.ru

Summary of Contents for 310HD





























































































































































































































































































Search results

Summary of Contents for 310HD

Reviews:

Related manuals for 310HD

Brands by name

Popular brands

AudioCodes 310HD, Administrator'S Manual

Search results

Summary of Contents for 310HD

Reviews:

Related manuals for 310HD

Brands by name

Popular brands