AudioCodes 310HD, Administrator'S Manual, Page: 117 / 284

Administrator's Manual 19. Media Settings
19 Media Settings
The procedures for configuring media settings are described below.
19.1 Configuring Media Streaming
The Configuring Media Streaming feature can be configured using the Configuration File
parameters as described in the table below.
Table 19-1: Media Streaming Parameters
Parameter Description
voip/media/rtp_mute_on_hold
Mute sending RTP packets to remote in HOLD state.
ƒ [0] - Disabled. RTP packets are sent to remote end
when in HOLD state.
ƒ [1] - Enabled (default). RTP packets are not sent to
remote end when in HOLD state.
voip/media/allow_multiple_rtp Defines whether to allow multiple RTP streams from
different remote ends to be played toward the phone in
a single call.
ƒ
[0] Disable (default)
ƒ
[1] Enable
voip/media/ignore_rfc_2833_packets
Defines whether to ignore playing DTMF when
RFC2833 arrives from the network.
ƒ
[0] Disable
ƒ [1] Enable (default)
If enabled an active call will be automatically
disconnected if no RTP packet is received within pre-
defined time.
/voip/media/broken_connection_detection
If no RTP packet arrives for an active call within this
timeout (in seconds), the connection will be considered
broken and the call will be disconnected.
/voip/media/broken_connection_timeout
Version 2.0.0 117 October 2012
http://arttel.ru