ATS Maximus MCJ2000 Series, Reference Manual

Page: 70 / 214

3-16 Maximus Reference Manual MANU-MAXIMUS-02
Revision-02
ATS Setup Mode Chapter 3: Monochrome Terminals
Setup Mode Parameters
Setup Mode provides the following parameters:
• "Re-Boot" on page 3-16
• "Setup Password" on page 3-17
• "Setup Host Connect" on page 3-18
• "Setup Smartcard" on page 3-27
• "Setup Comm Port" on page 3-28
• "Device Setup" on page 3-29
• "Setup WiFi" on page 3-30
• "Reset Dnld" on page 3-37
• "Download from USB" on page 3-38
• "Date/Time Setup" on page 3-39
Re-Boot
Re-booting the terminal actives any changes made to the setup parameters. The terminal
prompts you to re-boot each time you enter
Setup Mode .
1. When you enter Setup Mode the terminal displays the Re-Boot prompt. Press
the enter key to proceed with the re-boot or press the clear key to bypass Re-
Boot and continue to the Setup Password parameter (described on page 3-
17 ).
Press the clear key at the Re-Boot prompt to enter Setup Mode . Rebooting is the only way
to exit Setup Mode (though you can return to the start of the Initial setup menu by holding
down the clear and enter keys).
Rebooting saves your changes and restarts the terminal. If you made no changes, then
rebooting only restarts the terminal.
NOTE:
NOTE:
ATS Setup Mode
Re-Boot