3-60
Maximus Reference Manual
MANU-MAXIMUS-02
Revision-02
Test Mode
Chapter 3: Monochrome Terminals
3.
Press the numeric keys in sequence from
1
to
9
then the
0
key. Next press the
function keys in order (i.e., “F1” then “F2” and so forth to “F8”).
If you press a button out of sequence, the terminal sounds an error tone and the
“X / Error” LED illuminates for each incorrect press.
If you press the buttons in sequence and the button functions correctly, the
terminal confirms the key by displaying it on the screen while illuminating the
“OK / check” LED for each correct key press.
4.
If you pressed the keys in the correct sequence and all the keys are functioning
correctly the test self-terminates and the system returns to the
Test Mode
menu
(at the
DIDO Test 1
option).
Biometric Test
The biometric test checks the functionality of an optional biometric fingerscan reader (if
installed.
Use the following procedure to test an installed biometric fingerscan reader:
1.
In the
Test Mode
menu, press the
clear
key until the
Biometric Test
option
appears.
Test Keypad
1234567890ABCD
If the terminal is not equipped with a biometric reader, this option does not appear in the
Test Mode
menu.
NOTE:
Test Mode
Biometric Test
