3-48
Maximus Reference Manual
MANU-MAXIMUS-02
Revision-02
Test Mode
Chapter 3: Monochrome Terminals
2.
Press the
enter
key to exit test mode and return to start of the
ATS TSD Mode
menu (
Setup Mode
option), or press the
clear
key to proceed to the
System
Diag Dump
option.
System Diag Dump
Typically an ATS technician requests/directs running this test to help troubleshoot the terminal.
When complete, the
System Diag Dum
p test saves the results of the terminal tests in text file
format to a USB flash drive plugged into the Maximus terminal. Use the following procedure
to run a
System Diag Dump
:
1.
In the
Test Mode
menu, press the
clear
key until the
System Diag Dump
option appears.
2.
Press the
enter
key to start the
System Diag Dump
or press the
clear
key to
return to the
Test Mode
menu.
3.
If you selected the
System Diag Dump
option, the terminal prompts you to
Attach UDSB Drive then press Enter
. Insert a USB flash drive in the USB port
on the Maximus terminal then press the
enter
key.
Test Mode
Exit
Test Mode
System Diag Dump
Attach USB Drive
then press Enter
