Chapter 4: Color Terminals
Test Mode
MANU-MAXIMUS-02
Maximus Reference Manual
4-31
Revision-02
Press the “F2”Function key to enter Test Mode and display the Test Mode screen as shown in
Figure 4-26
Test Mode
•
Use the
Next
function (“F8” key) to cycle through the tests.
•
Use the
Prev
function (“F7” key) to cycle through the tests in the reverse order.
•
Press the
enter
key to start the currently displayed test.
You can select the tests in the following sections (some require optional hardware and
configuration to activate the test in the menu).
Reader Test
This test enables you to test a card reader or wand. Press the enter key when the display reads
“
Test Mode Reader Test
” to start the test. When the display reads “
Test Reader or Wand
”
use a card (e.g., swipe) or activate the wand. Press the
clear
key or select
Next
to exit the test
when finished.
Biometric Test
Press the
enter
key when the display reads “
Test Mode Biometric Test
” to start the test. The
display changes to read “
Test Finger Print Press Enter to start
”. Press the
enter
key and
follow the directions on the screen (steps through an enrollment test followed by a verification
test). If the test fails, you can press the
enter
key to reselect the Biometric Test. Press the
clear
key or select either
Next
or
Prev
to exit the test when finished.
03:38:15
Friday
Nov 7, 2014
Prev
Next
Test Name
Test Mode
To exit Test Mode, cycle through the test selections until the Exit option appears, then press
the enter key.
NOTE:
