Chapter 4: Color Terminals
Setup Mode
MANU-MAXIMUS-02
Maximus Reference Manual
4-21
Revision-02
Figure 4-18
Comm Port Menu Screen
Use the following procedure to configure the serial communications settings:
1.
To change the
Baud Rate
press the “F1” key to scroll through the available
rates. The currently selected value displays in the middle of the screen. The
default value is
9600
baud. The options are
1200
,
4800
,
9600
,
19200
,
38400
,
57600
, and
115200
baud (bps).
2.
To change the value for the
Data Bits
parameter press the “F2” key to toggle
the data bits between
7
and
8
. The currently selected value displays in the
middle of the screen. The default value is
7
data bits.
3.
To change the value for the
Parity
parameter, press the “F3” key to scroll
between the parity options of
odd
,
even
, and
none
. The currently selected
value displays in the middle of the screen. The default value is
odd
.
4.
T
o change the value for the
Stop Bits
parameter, press the “F4” key to toggle
between
1
or
2
stop bits. The currently selected value displays in the middle of
the screen. The default value is
2
stop bits.
5.
T
o change the value for the
Smartcard
, press the “F5” key to scroll between
off
,
1k
or
4k
. The currently selected value displays in the middle of the screen.
Set this selection to match the storage capacity of an installed smartcard or set it
to
off
if the Maximus is not equipped with a smartcard.
6.
Press the “F8” key to select
Return To Setup
and go to the Setup Mode Main
Menu screen.
03:42:04
Friday
Nov 7, 2014
Baud Rate
Data Bits
Parity
Stop Bits
Smartcard
Off
Return
To
Setup
Baud Rate XXXXXX
Data Bits XX
Parity XXX
Stop Bits X
