Chapter 4: Color Terminals
Setup Mode
MANU-MAXIMUS-02
Maximus Reference Manual
4-29
Revision-02
5.
To change the name for the Maximus terminal, press the “F6” key to select the
Terminal Name
parameter and access the
Enter the Terminal Name
prompt
screen. The
Terminal Name
parameter enables you to set a unique up-to-20
character administrative name for the terminal. The default name is “ATS” plus
the last 6-digits of the terminal MAC address (e.g.,
ATS000001
).
Common Settings for Dynamic and Static IP Modes
•
Return to Setup
– This function appears in different menus and returns the
terminal to the previous menu screen. For example, press the “F4” key when in
the TCP/IP WiFi setup screen to return to the Host Type Ethernet menu screen or
press the “F8” key when in the Comm Post setup menu to return to the Host
Type configuration screen.
Applications such as Accu-Engine require “ATS” as the first three characters of the Terminal
Name. If not, Accu-Engine will only display the terminal IP address (that can change with
DHCP enabled).
Firmware Versions prior to 2.05.11(X) do not save any changes to the Terminal Name. If you
make any changes the terminal reverts to the default Terminal Name after a re-boot.
NOTE:
NOTE:
