Chapter 3: Monochrome Terminals
ATS Setup Mode
MANU-MAXIMUS-02
Maximus Reference Manual
3-21
Revision-02
•
Since any host on the network can try to make a connection with the
terminal, any host that knows how to communicate with the terminal can
read data from the terminal.
The following parameters are the same as the terminal displays at initial setup (
7.
The terminal displays the default (
192.168.001.100
) or saved value for the Host
that provides communications to the terminal. The host IP address is ignored if
the terminal is in server mode.
Press the
enter
key to accept the displayed IP address and continue to the next
parameter or press the
clear
key to change the host IP address.
If you pressed the
clear
key use the numeric keys to type in the IP address of the
host then press the
enter
key to save the new IP address.
If you type an invalid IP address, the terminal displays
Bad IP Address
and
returns you to the saved/default value. Press the
clear
key again to correct the
address then press the
enter
key to save it.
8.
Next the terminal displays the default/saved socket port number used by the
terminal. The default value is
2500
. Press the
enter
key to accept the displayed
port number or press the
clear
key to change it using the numeric keys. When
finished press the
enter
key to save the socket port number and continue to the
next parameter.
If you type an invalid socket port number the terminal displays
Invalid Socket
Port
. and returns you to the saved/default value. Press the
clear
key again to
correct the port number then press the
enter
key to save it.
By default, ATS uses port 2500 for the network connection between the
terminal and a connecting computer.
Setup Host IP
nnn.nnn.nnn.nnn
Setup Socket Port
Socket Port: 2500
