3-20
Maximus Reference Manual
MANU-MAXIMUS-02
Revision-02
ATS Setup Mode
Chapter 3: Monochrome Terminals
5.
If you selected
Enabled
for the
PPP
parameter the terminal prompts you for the
Service Provider
. This parameter allows you to select your wireless network
provider from the list of service providers.
Press the
enter
key to accept the displayed
Service Provider
or press the
clear
key to scroll through the list of providers. Press the
enter
key when the terminal
displays the desired provider.
The available providers are;
stream
,
proximus
,
o2
,
etisalat
,
datalink
,
att-gold
,
att
,
ats-tm
,
O2UK
,
ATS-t-mobil
,
Wlogic-ATT
,
wlogic
,
AIS
,
vodafoneUK
,
vodafone
,
vodacom
,
vodaPAYG
,
telenor
,
t-mobil-uk
,
t-
mobile
.
6.
Next the terminal displays the current
Setup Socket Type
parameter setting
(
Client Mode
or
Server Mode
).
In client mode, the terminal connects to the host server using the socket port as
defined in the
Setup Socket Port
parameter. In client mode, the terminal
makes the TCP/IP connection to the designated host computer. When in this
mode, the terminal does not accept a connection request from any outside
device.
In server mode, the terminal awaits a connection initiated by the host using this
socket port as follows:
•
The terminal waits for a host server to initiate a connection. The terminal
does not attempt to connect to any host server, so it is the host server’s
responsibility to make the connection request with a terminal. The terminal
is set up to accept a single connection that can come from any host.
•
A terminal connection needs to be maintained only when the host server
needs to, which reduces network traffic, such as Keep Alives.
•
You can change the host server without needing to set up your terminals.
Service Provider
stream
Setup Socket
Type: Client Mode
